• image one
  • image two
  • image three
  • image four

Alignment Lifts

fp14ka

FP14KA

  • 14,000 lb lifting capacity
  • Chain drive
  • Single point pneumatic safety release mechanism
  • 20" wide non-skid, diamond plate runways
  • Powder-coated paint finish
  • C-channel construction
  • Hydraulic Operation for minimum maintenance
  • Three turntable positions for a wide range of vehicles
  • Optional turntables available
  • Rear slip plates mounted on roller bearings
  • Fully adjustable lock stops for easy leveling
  • Specs
  • Manual

  • 14,000 lb lifting capacity
  • Cable drive
  • Single point pneumatic safety release mechanism
  • 20" wide non-skid, diamond plate runways
  • Powder-coated paint finish
  • C-channel construction
  • Hydraulic Operation for minimum maintenance
  • Three turntable positions for a wide range of vehicles
  • Optional turntables available
  • Rear slip plates mounted on roller bearings
  • Fully adjustable lock stops for easy leveling
  • Specs
  • Manual

  • 14,000 lb lifting capacity
  • Cable drive
  • Single point pneumatic safety release mechanism
  • 20" wide non-skid, diamond plate runways
  • Powder-coated paint finish
  • C-channel construction
  • Hydraulic Operation for minimum maintenance
  • Three turntable positions for a wide range of vehicles
  • Optional turntables available
  • Rear slip plates mounted on roller bearings
  • Fully adjustable lock stops for easy leveling
  • Specs
  • Manual

Alignment Accessories

Bendpak HD-9AE

  • 9,000-lb. maximum lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Multi-caster slip plates
  • Dual radius plate positions
  • heavy-duty stainless steel lifting cables
  • Dual-hub cable sheaves
  • Grease nipples on every sheave and sheave axle
  • Single hydraulic cylinder
  • Integrated hydraulic flow restrictor
  • Durable powser coat finish
  • Spring-loaded safety locks
  • Simple push-button lock release
  • Aircraft-quality stainless steel and aluminum pneumatic cylinders
  • Secondary lock system
  • Fully enclosed cables, airlines, safety latches and sheaves
  • Multiple adjustable height locking positions
  • Maintenance-free power system
  • Easy-to-reach operator controls
  • Non-skid runways

Bendpak XR-12000A

  • 12,000-lb. lifting capacity
  • Extended runway design for greater vehicle capacity
  • Integrated recessed full-floating front radius plates and over-sized rear slip-plates
  • Turn plate pockets feature adjustable leveling bolts for infinite turn plate leveling
  • Durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection
  • Extendable, hinged, collapsible, and stowable approach ramps 
  • Multi-position runway work steps 
  • Non-skid runways provide sure grip for vehicles and technicians 
  • Dependable electric/hydraulic power system 
  • Cylinders feature integrated velocity fuses to control sudden descent
  • Power console features simple operator controls 
  • Open front design with clear center, sides and rear 
  • Multi-position automatic leveling system 
  • Quad automatic safety locks with pneumatic push-button release 
  • Collapsible front tire stops clear for low vehicle skirts and alignment instrumentation 
  • Lubricated-for-life bearings on all pivot points 
  • Rugged steel legs and formed steel runways 
  • Turned, ground, polished and hardened zinc plated axle pins 
  • Grease nipples on all moving pins and bearings 
  • High efficiency hydraulic power unit provides faster raising and descent times 
  • Easy access to hydraulic/electrical components for simple routine servicing 
  • Easy to use and understand operator controls 
  • Power unit console with easy access front panel 
  • Can be flush mounted or recessed

Bendpak HDS-14LSX

  • 14,000 pound lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Two runway lengths to choose
  • Heavy‐duty turn plates and integrated rear slip‐plates included
  • Multi‐position turn plate pockets
  • Automatic leveling system
  • Multiple auto-leveling locking positions
  • Runways include rail‐kit for optional accessories
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks, and sheaves
  • Internal “Anti-Sway” slider blocks in each column
  • Features oversize sheaves and heavy‐duty 1/2” aircraft cable
  • Rugged 1‐3/8” roller axles and oversize self‐lubricating cable sheaves
  • Multi‐position safety locks in each column with push‐button safety release
  • Runways adjust for different tread widths and feature non‐skid surface
  • Optional 7,000 pound capacity bridge jacks available (Model RJ‐7)

Bendpak HDS-14LSXE

  • 14,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Two runway lengths to choose
  • Heavy‐duty turn plates and integrated rear slip‐plates included
  • Multi‐position turn plate pockets
  • Automatic leveling system
  • Runways include rail‐kit for optional accessories
  • Electric/hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Internal “Anti-Sway” slider blocks in each column
  • Features oversize sheaves and heavy‐duty ½” aircraft cable
  • Rugged 1‐3/8” roller axles and oversize self‐lubricating cable sheaves
  • Multi‐position safety locks in each column with push‐button safety release
  • Runways adjust for different tread widths and feature non‐skid surface
  • Optional 7,000 pound capacity bridge jacks available (Model RJ‐7)

Bendpak HDSO-14LSX

  • 14,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Huge cable sheaves reduce wear and tear
  • Extremely convenient open-front design for easy access
  • Extended 199" runway length for servicing long wheelbase vehicles
  • Longer approach ramps for low ground clearance vehicles
  • Electric / hydraulic power system
  • Runways include rail-kit for optional accessories
  • Runways adjust for different tread widths
  • Automatic leveling system with multiple auto-leveling locking positions
  • Equipped with heavy-duty rear slip plates and front turn plates
  • Multiple turn plate pockets for better wheelbase accommodation
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks, and sheaves
  • Internal anti-sway slider blocks in each column
  • Pneumatic push-button safety release
  • Features heavy-duty 1/2" aircraft cable
  • Safety locks enclosed in columns minimize pinch points
  • Oversized sheave diameter reduces cable fatigue
  • Runways feature non-skid surface
  • Rugged, self-lubricating cable sheaves
  • Features 1-3/8” sheave axles
  • Multi-position safety locks in each column
  • Independent backup slack-cable safety latches
  • Includes fully adjustable lock stops for precise leveling
  • Integrated rolling bridge airline kit option available
  • Roll-back kit options available
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional 7,000-lb. capacity rolling jacks available (Model RJ-7)

Bendpak HD-18EA

  • 18,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Multi-caster slip plates
  • Spring-loaded automatic safety locks
  • Supersized 12" diameter cable sheaves
  • Four stainless-steel lifting cables
  • Grease nipples on every sheave and axle
  • Single hydraulic under-runway cylinder
  • Integrated hydraulic flow restrictor
  • Durable powder coat finish
  • Push-button pneumatic lock release
  • Secondary lock system on constant guard
  • Enclosed cables, airlines, safety latches
  • Multiple adjustable locking positions
  • Maintenance-free power system
  • Conveniently located controls
  • 12" x 12" base plates
  • Non-skid runways
  • Optional rolling jacks available

Bendpak HDS-35A

  • 35,000-lb. lifting capacity alignment lift
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Multi-caster slip plates
  • Spring-loaded automatic safety locks
  • Supersized 12" diameter cable sheaves
  • Four stainless-steel lifting cables
  • Grease nipples on every sheave and axle
  • Single hydraulic under-runway cylinder
  • Integrated hydraulic flow restrictor
  • Durable powder coat finish
  • Push-button pneumatic lock release
  • Secondary lock system on constant guard
  • Enclosed cables, airlines, safety latches
  • Multiple adjustable locking positions
  • Maintenance-free power system
  • Conveniently located controls
  • 12" x 12" base plates
  • Non-skid runways
  • Optional rolling jacks available

Bendpak HDS-35XA

  • 35,000-lb. lifting capacity alignment lift
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Multi-caster slip plates
  • Spring-loaded automatic safety locks
  • Supersized 12" diameter cable sheaves
  • Four stainless-steel lifting cables
  • Grease nipples on every sheave and axle
  • Single hydraulic under-runway cylinder
  • Integrated hydraulic flow restrictor
  • Durable powder coat finish
  • Push-button pneumatic lock release
  • Secondary lock system on constant guard
  • Enclosed cables, airlines, safety latches
  • Multiple adjustable locking positions
  • Maintenance-free power system
  • Conveniently located controls
  • 12" x 12" base plates
  • Non-skid runways
  • Optional rolling jacks available

Ranger 3DP4100 Wheel Aligner

  • Self-balancing, variable height camera lift system is built with precision bearing slides for easy adjustment
  • Commercial-grade cameras are designed with full frame optical lenses that ensure accuracy and stability
  • High-resolution drive-on approach camera provides full on-screen frontal view of vehicle driving on lift platforms.
  • Equipped with an additional large lower flat panel LCD monitor that provides operator with easy-to-read screen views all the way from the rear underside of the vehicle. No need for separate portable hand-held monitors.
  • Interactive software provides demonstration screens that assist the technician to easily proceed systematically through the adjustment process
  • Rugged checkerboard shockproof wheel targets are drop-tested for worry-free handling and are built with anti corrosion components capable of withstanding harsh working environments.
  • German engineered ProSpec® software has been designed to be compatible with Windows 7 and capable of future upgrades.
  • In less than 2-minutes, technicians can complete total vehicle set-up (including run-out compensation) and obtain full geometry alignment readings.
  • Exclusive One-Touch enhanced software interface results in increased productivity.
  • A web based application that can be accessed from iPhone, iPod touch and iPad users to enjoy full wireless remote operation.
  • A reduction in the number of vulnerable electric components results in reduced downtime, lower operating costs and a longer service life cycle of the equipment.
  • Superior screen graphics with vibrant animation and displays deliver easy to understand visuals and instruction.
  • Alignment functions and measurements are controlled via the mouse, keyboard or remote control.
  • Self-explanatory graphic user surface provides simple understanding.
  • Compatible with low ride-height vehicles or those with ground-effects.
  • Self-centering wheel-clamp adaptors cover an extended range of vehicles.
  • Cordless design remove hassle of connecting cables.
  • Technician has the option to customize alignment units of measure, accuracy, language, etc.
  • Technician has a choice of rolling or lifted run-out modes.
  • Features self-diagnostic help screen and system information.
  • Continuous checking ensures accurate toe measurements.
  • On-screen display indicates if sensor leveling is required.
  • Vehicle adjustment illustrations and multiple adjustment bar graphs.
  • Adjustment illustrations provide illustrated diagrams and instructional information of recommended OEM adjustment methods..
  • Valuable customer information can be conveniently stored in the database allowing shop personnel to quickly reference previous alignment work orders.
  • Before and after measurements can be printed in full-color to explain service and record work performed.